Thermo Anemometer in Saudi | Thermo Anemometer Supplier KSA

The Extech AN200 Thermo Anemometer in Saudi combines air velocity, calculated airflow, air temperature and infrared surface temperature measurements in one portable instrument. It helps HVAC technicians investigate ventilation performance and compare conditions during maintenance visits.

Nassguard supplies the Extech AN200 across Riyadh, Dammam, Jubail, Jeddah and Al Khobar. Its separate vane sensor makes it easier to position the probe in an air stream while keeping the display visible. Meanwhile, the built-in IR thermometer provides non-contact surface-temperature checks.

What Is the Extech AN200 Thermo-Anemometer?

The Extech AN200 is a handheld vane anemometer with temperature measurement. Air passing through the vane rotates its wheel, allowing the instrument to measure air speed. After the user enters the correct opening area, the meter calculates airflow in CFM or CMM.

CFM means cubic feet per minute, while CMM means cubic metres per minute. These units describe air volume moving through an opening over time.

The instrument also measures air temperature through the probe and surface temperature through its infrared sensor. These are separate measurements: an air-temperature reading describes the air stream, while an IR reading describes the targeted surface.

Key Features of the Extech AN200

The AN200 thermo-anemometer combines useful measurement and display functions for ventilation troubleshooting.

• Air velocity measurement: Measures air speed from 0.40 to 30.00m/s, with additional selectable units.
• CFM/CMM airflow calculation: Calculates volumetric airflow using the measured velocity and entered area.
• Simultaneous display: Shows air velocity or airflow alongside air temperature.
• Built-in IR thermometer: Measures surface temperatures from −50°C to 260°C without contact.
• 20-point averaging: Helps combine readings from multiple measurement positions.
• Area-setting memory: Retains opening-area settings for repeated checks.
• Data Hold and MIN/MAX functions: Support reading capture and comparison during inspections.
• Separate vane probe: Includes a 72mm vane wheel and approximately 1.2m cable, plus a protective holster and carrying case.

Applications of Thermo Anemometers in Saudi

The Extech AN200 supports airflow and temperature checks during installation, servicing and routine facility inspections.

• HVAC maintenance in Riyadh: Compare air velocity at accessible supply and return openings.
• Ventilation inspections in Jeddah: Investigate uneven air distribution and changes in outlet performance.
• Workshop ventilation in Dammam: Check suitable ventilation openings during maintenance.
• Plant maintenance in Jubail: Compare airflow readings before and after servicing.
• Commercial facilities in Al Khobar: Support ventilation checks in offices, shops and shared areas.
• Fume hood assessments: Support face-velocity measurements using an appropriate test procedure.
• Filter maintenance checks: Compare readings before and after filter replacement under consistent operating conditions.
• Surface-temperature screening: Use the IR thermometer to compare suitable equipment and building surfaces.

Certifications, Standards and Compliance

• CE Marking — Extech AN200 Declaration of Conformity: Declares conformity with the European requirements identified for the AN200.
• EN 61326-1 — Electromagnetic Compatibility: Listed for electromagnetic compatibility requirements applicable to measurement, control and laboratory equipment.
• EN 60825-1 — Laser Product Safety: Listed in the declaration for the instrument’s laser-related safety requirements.
• RoHS Directive 2011/65/EU: Included for restrictions on specified hazardous substances in electrical and electronic equipment.

Taking Useful Airflow and Temperature Readings

Consistent probe positioning and accurate area entry make thermo-anemometer measurements more useful.

• Align the vane correctly: Follow the airflow-direction arrow on the sensor.
• Select the required units: Choose velocity units or CFM/CMM before recording results.
• Enter the correct area: Match the opening area and its units to the selected airflow mode.
• Sample multiple positions: Use a suitable measurement pattern where airflow varies across an opening.
• Use averaging appropriately: Combine representative readings rather than relying on one position.
• Allow temperature stabilisation: Give the probe time to adjust after moving between environments.
• Respect the IR spot size: Ensure the target is larger than the measurement spot.
• Account for surface finish: Reflective surfaces can affect readings from the fixed-emissivity IR sensor.
• Use the laser carefully: Keep the beam away from eyes and reflective paths.

Inspection, Maintenance and Calibration

Routine care helps protect the vane sensor, cable and infrared optics.

• Inspect the vane wheel for damage or contamination before use.
• Check the sensor cable and connector for wear and loose connections.
• Keep the IR lens clean using an appropriate cleaning method.
• Replace the battery when the low-battery indicator appears.
• Store the meter in its carrying case between inspections.
• Remove the battery before extended storage.
• Arrange periodic calibration according to your quality procedures.
• Specify calibration coverage when ordering: The AN200-NIST and limited-calibration options require separate selection.

Why Choose Nassguard for Thermo Anemometers in Saudi?

Nassguard supports customers sourcing airflow and temperature instruments for HVAC maintenance, workshops and facility teams.

• Model-specific quotations: Request the Extech AN200 with your required quantity.
• Application-based enquiries: Specify the velocity range, airflow units and temperature measurements you need.
• Calibration coordination: Confirm any traceability and calibration-scope requirements before ordering.
• Saudi supply coverage: Enquire from Riyadh, Dammam, Jubail, Jeddah and Al Khobar.

Frequently Asked Questions

1. What does the Extech AN200 measure?
It measures air velocity, air temperature and IR surface temperature, and calculates volumetric airflow.

2. Can the AN200 display CFM and CMM?
Yes, it calculates CFM or CMM after you enter the appropriate opening area.

3. What is its air velocity range?
The range is 0.40–30.00m/s.

4. Does it include an infrared thermometer?
Yes, its built-in IR thermometer measures surface temperatures from −50°C to 260°C.

5. What does the 8:1 distance-to-spot ratio mean?
At an 80cm distance, the nominal measurement spot is approximately 10cm across, so the target must be larger than that spot.

6. Does the standard AN200 include NIST-traceable calibration?
Specify the appropriate NIST calibration option separately when your project requires it.

7. What is the Extech AN200 price in Saudi?
Contact Nassguard for a quotation based on quantity, calibration requirements and delivery location.

Conclusion

The Extech AN200 Thermo-Anemometer with IR Thermometer combines airflow checks and two temperature-measurement methods in one portable instrument. Its separate vane probe, averaging function and stored area settings suit repeated ventilation inspections and maintenance comparisons.

For a Thermo Anemometer in Saudi, contact Nassguard with your application, quantity and calibration needs. Correct probe alignment, representative sampling and accurate area entry help turn individual readings into useful maintenance information.