Cable Pulling Sock in Saudi is a cable installation accessory designed to grip suitable cables during controlled pulling and routing work. The Cablegrip Type K II-K uses a double-braided wire-mesh construction with two pressed loops, providing a practical pulling connection for electrical, industrial and infrastructure applications.
Nassguard supplies Cable Pulling Socks in Riyadh, Jeddah, Dammam, Jubail and Al Khobar, with supply available across Saudi Arabia.
A Cable Pulling Sock is a flexible wire-mesh grip used to hold a suitable cable while workers pull it through a prepared route, duct or installation pathway. It is also commonly called a Cable Grip, Cable Pulling Grip, Cable Pulling Stocking, Wire Cable Grip or Wire Pulling Sock.
The Type K II-K design uses a double braid and has two pressed loops. This configuration allows the grip to be positioned around a cable and connected to suitable pulling equipment.
The mesh tightens around the cable as pulling force is applied. This creates a distributed gripping action around the cable rather than relying on a simple tied connection.
The correct size depends on the cable diameter and required pulling force. Therefore, users should check the working diameter, overall length and permissible tensile force of the selected configuration before use.
Electrical Cable Installation: Electrical contractors can use suitable cable pulling socks when routing cables through prepared pathways, ducts and conduits.
Cable Duct Installation: The Type K II-K can provide a practical pulling connection when suitable cables need to pass through ducts.
Underground Cable Work: Suitable cable grips can assist controlled cable pulling during underground installation when the cable and pulling arrangement meet the product requirements.
Industrial Electrical Projects: Industrial contractors can use cable pulling socks during electrical installation, maintenance and infrastructure projects.
Power Distribution: Suitable cable grips can support controlled installation of power cables when the selected configuration matches the cable diameter and pulling force.
Building Projects: Electrical installation teams can use suitable cable pulling grips when routing cables through prepared building pathways.
Infrastructure Work: Utility contractors can use cable pulling socks during suitable infrastructure and cable installation work.
Cable Replacement: Maintenance teams can use an appropriate grip during cable replacement when the cable size and pulling requirements match the selected product.
Nassguard supplies Cable Pulling Socks in Riyadh and Jeddah for suitable electrical installation work. Contractors in Dammam and Jubail can use appropriate cable grips for industrial and infrastructure projects. The product is also supplied in Al Khobar and across Saudi Arabia.
The Cablegrip Type K II-K provides a practical gripping connection between a suitable cable and compatible pulling equipment. Its double-braided mesh spreads the gripping action around the cable during a controlled pulling operation.
The two pressed loops provide connection points for the pulling arrangement. This makes the design useful where installers need a stable grip around the cable during installation.
The correct size remains important. A grip that does not match the cable diameter may not provide the intended gripping performance. Excessive pulling force can also place additional stress on both the cable and grip.
Before installation, workers should confirm the cable diameter, grip size and permissible tensile force.
The pulling route also matters. Bends, long runs and other installation conditions can increase the force required to move a cable. The installation team should use suitable pulling equipment and follow the approved installation procedure.
Selecting the correct Cable Pulling Sock in Saudi starts with measuring the outside diameter of the cable. Compare this measurement with the working diameter specified for the selected grip.
Next, check the required pulling force. The pulling force must remain within the permissible tensile force of the selected configuration.
Workers should inspect the mesh and pressed loops before every installation. Look for broken wires, corrosion, deformation, excessive wear or other visible damage.
The cable should remain correctly positioned within the grip throughout the pulling process. Workers should avoid sudden loading and excessive pulling force.
The pulling equipment should also remain aligned with the intended installation route. This helps maintain controlled movement and reduces unnecessary stress on the cable and grip.
1. What is a Cable Pulling Sock used for?
A Cable Pulling Sock is used to provide a controlled gripping connection around a suitable cable during pulling and installation operations.
2. What are other names for a Cable Pulling Sock?
Common terms include Cable Grip, Cable Pulling Grip, Cable Pulling Stocking, Wire Cable Grip and Wire Pulling Sock.
3. What is the construction of Type K II-K?
The Type K II-K uses a double-braided wire-mesh construction with two pressed loops.
4. Where can Type K II-K Cable Pulling Socks be used?
They can support suitable electrical, industrial, infrastructure, utility and cable-installation applications where the selected configuration matches the cable and pulling requirements.
5. How do I choose the correct Cable Pulling Sock size?
Measure the cable’s outside diameter and compare it with the specified working diameter of the selected Type K II-K configuration. Also check its permissible tensile force.
6. What should I inspect before using the Cable Pulling Sock?
Workers should inspect the wire mesh, pressed loops and connection areas for broken wires, corrosion, deformation and excessive wear before starting the pulling operation.
7. Where can I buy Cable Pulling Socks in Saudi Arabia?
Nassguard supplies Cable Pulling Socks in Riyadh, Jeddah, Dammam, Jubail and Al Khobar, with supply available across Saudi Arabia.
Cablegrip Type K II-K provides a practical gripping solution for suitable electrical cable pulling and installation work. Its double-braided wire mesh and two pressed loops create a dedicated connection between a suitable cable and compatible pulling equipment.
The product can support electrical installation, industrial projects, infrastructure work, cable duct installation and suitable cable replacement operations.
Selecting the correct configuration is important. Users should confirm the cable diameter, working diameter, permissible tensile force and overall product configuration before use.
Regular inspection can help identify broken wires, corrosion, deformation and other damage before the grip enters service.
For businesses looking for a Cable Pulling Sock in Saudi, Nassguard supplies suitable cable pulling grips across Riyadh, Jeddah, Dammam, Jubail and Al Khobar, with supply available throughout Saudi Arabia.
| Specification | Details |
|---|---|
| Product Name | Cablegrip, Type K II-K |
| Product Type | Cable pulling sock / wire cable grip |
| Construction | Double braid |
| End Configuration | Two pressed loops |
| Main Application | Cable pulling and installation |
| Material | Steel wire mesh |
| Working Diameter | Depends on selected variant |
| Overall Length | Depends on selected variant |
| Permissible Tensile Force | Depends on selected variant |
| Main Uses | Electrical, industrial and infrastructure cable installation |
| Standard Listed | WKS-2023 |
| Supply Areas | Riyadh, Jeddah, Dammam, Jubail, Al Khobar and Saudi Arabia |
