Intumescent Sealant in Saudi | Intumescent Sealant Supplier Saudi

Intumescent Sealant in Saudi from Nassguard includes FS709 HP Intumescent Sealant, a graphite-based product for specified service penetrations and linear gaps in fire-rated construction. When exposed to fire, it expands to help close openings and restore the fire performance of qualifying wall and floor assemblies.

Nassguard supplies FS709 HP fire-stopping sealant across Riyadh, Dammam, Jubail, Jeddah and Al Khobar. It supports contractors and maintenance teams working on pipe penetrations, cable openings and compatible fire-barrier systems.

What Is FS709 HP Intumescent Sealant?

FS709 HP is a water-based, graphite intumescent sealant. Its formulation expands and exerts pressure when heated, helping close gaps left as combustible services soften or deteriorate during a fire.

This makes it useful around specified plastic pipes, insulated pipes and cable installations. In qualifying arrangements, it can act as the closing component without a separate pipe collar or wrap. That substitution must match the assessed detail.

The complete installation determines fire performance. Service material, diameter, insulation, opening size, backing and sealant depth all matter. Up to four hours of fire resistance applies to qualifying assemblies rather than every bead of sealant.

Key Features of FS709 HP Intumescent Sealant

FS709 HP combines heat-activated expansion with practical application features for specified passive fire-protection work.

• Graphite intumescent action: Expands under fire exposure to help close qualifying openings.
• Tested fire resistance: Provides up to 240 minutes in specified arrangements.
• Multiple service applications: Tested with selected combustible pipes, insulated non-combustible pipes and cables.
• Cable-support compatibility: Suitable assessed details include cable trays, ladders, baskets and bundles.
• Fire-barrier integration: Can form part of specified FB750 Intubatt, FR230 Intucompound and FB770 Intudeck systems.
• Larger-opening options: Tested arrangements include openings up to 600 × 600mm.
• Linear-gap applications: Tested for specified linear gaps up to 25mm.
• Traceability technology: Includes Optifire®+ identification to support on-site product verification.

Applications of Intumescent Sealant in Saudi

FS709 HP fire sealant supports construction and refurbishment projects where the service and supporting construction match an assessed installation.

• Commercial buildings in Riyadh: Seal qualifying service penetrations through compartment walls.
• Fit-out projects in Jeddah: Complete specified cable and pipe fire-stopping details.
• Industrial facilities in Dammam: Seal suitable insulated pipe penetrations.
• Plant buildings in Jubail: Support assessed cable-tray, ladder and basket arrangements.
• Facility upgrades in Al Khobar: Reinstate qualifying seals after service alterations.
• Healthcare and education buildings: Support compartmentation around specified building services.
• Fire-barrier installations: Complete suitable service seals within compatible coated-batt or compound systems.
• Linear construction gaps: Seal qualifying gaps within the tested dimensional limits.

Confirm the exact pipe type and insulation material before selection. FS709 is not suitable around CPVC pipes; those applications require a separately specified compatible solution.

Certifications, Standards and Compliance

• ETA 20/1314 — Penetration Seals: European Technical Assessment identifying FS709 for assessed fire-stopping and service-penetration sealing applications.
• BS EN 1366-3 — Penetration-Seal Fire Tests: FS709 has been tested for fire resistance in specified service-penetration arrangements.
• BS EN 1366-4 — Linear-Joint Fire Tests: FS709 has been tested for specified linear-joint sealing applications.

Preparing and Applying Intumescent Fire Seals

Correct preparation and seal geometry help the completed installation achieve its intended performance.

• Identify the services: Record pipe material, diameter, insulation and cable arrangement.
• Confirm the assessed detail: Check wall or floor construction, opening size and required rating.
• Prepare sound surfaces: Remove dust, grease, loose particles and contamination.
• Install the specified backing: Maintain its required type, position and depth.
• Apply continuously: Fill the intended sealing zone without leaving concealed voids.
• Maintain sealant depth: Do not reduce the specified amount to improve apparent coverage.
• Tool promptly: Form a smooth finish with proper contact around the opening.
• Document the installation: Record the location, product and completed detail for inspection.

Use suitable protective equipment and ventilation. Select dry internal applications unless suitability for other exposure conditions has been established.

Inspection, Maintenance and Storage

Routine inspections help keep service-penetration seals intact after installation.

• Check for cracking, separation or missing material around services.
• Reinspect after cable or pipe changes, including small additions.
• Protect seals from impact and disturbance during nearby work.
• Repair using the correct assessed arrangement, including backing and depth.
• Retain installation records for future maintenance.
• Check packaging and expiry dates before application.
• Store away from direct sunlight and excessive heat within the specified limits.

Why Choose Nassguard for Intumescent Sealant in Saudi?

Nassguard supports FS709 HP enquiries for contractors, project purchasers and maintenance departments.

• Product-specific quotations: Request FS709 HP with your quantity and packaging requirements.
• Application-based enquiries: Provide service details, opening dimensions and required fire performance.
• Coordinated purchasing: Include specified backing and complementary fire-barrier products.
• Saudi supply coverage: Enquire from Riyadh, Dammam, Jubail, Jeddah and Al Khobar.

Frequently Asked Questions

1. What is FS709 HP used for?
It seals specified service penetrations and linear gaps in fire-rated construction.

2. How does an intumescent sealant work?
It expands under fire exposure to help close openings within a qualifying assembly.

3. Does FS709 always provide four-hour protection?
No, up to four hours applies only to specified tested or assessed arrangements.

4. Can FS709 replace a pipe collar?
Only where the exact assessed installation allows FS709 to act as the closing component.

5. Is FS709 suitable for CPVC pipes?
No, use a separately specified CPVC-compatible fire-stopping solution.

6. Is it a clear acrylic concrete sealer?
No, it is an anthracite graphite fire-stopping sealant, rather than a transparent concrete coating.

7. Where can I buy FS709 intumescent sealant in Saudi?
Contact Nassguard for quotations covering quantity, packaging and delivery location.

Conclusion

FS709 HP Intumescent Sealant provides a heat-activated sealing solution for qualifying pipe, cable and linear-gap applications. Its usefulness depends on matching the service type, supporting construction and seal dimensions to the assessed detail.

For Intumescent Sealant in Saudi, contact Nassguard with your application and quantity. Careful installation, clear records and inspection after service alterations help preserve the intended performance of the completed fire seal.