Silicate Adhesive in Saudi | Silicate Adhesive Supplier in Saudi

Brush Grade Silicate Adhesive, a brush-applied bonding material for suitable fire-resistant components. Its +1000°C continuous service-temperature resistance makes it suitable for applications where the adhesive must withstand high temperatures.

FO142 Intutac is particularly useful for bonding FJ203 Fire Rated Woven Rope in concrete joints and suitable rock fibre boards. Its brush-grade consistency allows installers to apply adhesive directly to the required bonding surfaces.

What Is FO142 Intutac Brush Grade Silicate Adhesive?

FO142 Intutac is a silicate-based adhesive used to bond compatible materials in fire-protection systems. It serves as a bonding component within the specified installation.

For contractors, the distinction matters: selecting the adhesive is one part of the job. The joint dimensions, backing material, substrate and installation arrangement also determine how the completed system performs.

Key Features of FO142 Intutac

FO142 combines high-temperature resistance with straightforward brush application for suitable bonding work.

• High-temperature resistance: Withstands continuous service temperatures up to +1000°C.
• Brush-grade application: Allows adhesive to spread across accessible bonding faces.
• Fast setting: Suitable for installation work requiring a fast-setting bond.
• Excellent adhesion: Bonds compatible fire-protection materials to properly prepared surfaces.
• FJ203 compatibility: Designed for appropriate bonding applications involving Fire Rated Woven Rope.
• Rock fibre board applications: Suitable for bonding compatible boards where the installation design permits.
• Water-cleanable tools: Supports practical cleaning after application.

Applications of Silicate Adhesive in Saudi

FO142 silicate adhesive supports specified bonding work in construction and passive fire protection. Select the adhesive alongside the complete system detail.

Typical applications include:

• Concrete expansion joints: Bonding FJ203 rope to the joint faces where adhesive is required.
• Rock fibre board bonding: Fixing suitable fire-protection boards in compatible applications.
• Fire-protection installation: Bonding specified components within the selected system.
• Refurbishment work: Reinstating adhesive bonding as part of a correctly designed repair.

Nassguard handles product enquiries for projects across Riyadh, Dammam, Jubail, Jeddah and Al Khobar. Include the application and substrate details when requesting Silicate Adhesive in Saudi.

Fire-Performance Standards and System Requirements

• EN 1366-4 — Fire Resistance Tests for Linear Joint Seals: Relevant to tested FJ203 joint assemblies incorporating FO142 where required; the standard applies to the complete joint system, rather than certifying the adhesive independently.

Surface Preparation and Brush Application

Prepare the bonding faces before opening the pail. Clean surfaces and the correct installation sequence help avoid interruptions during application.

• Confirm the joint design: Check the required backing, joint dimensions and adhesive arrangement.
• Prepare the substrate: Remove dust, loose particles and other bond-breaking contamination.
• Stir the adhesive: Mix thoroughly before brush application.
• Apply to the required faces: For specified FJ203 expansion joints, brush FO142 onto both opposing joint surfaces.
• Install the selected rope: Use the diameter and positioning required for the joint.
• Check additional sealing requirements: Include the specified finishing sealant where airtightness, cold-smoke sealing or watertightness is required.
• Clean tools with water: Keep application equipment ready for further use.

For the referenced FJ203 static-joint arrangement, adhesive is not required. Expansion-joint and static-joint installation requirements therefore need separate checks.

Inspection and Maintenance

Inspect the completed fire-protection assembly as part of routine building maintenance, especially after nearby repair or refurbishment work.

• Check joint continuity: Look for displaced backing, visible openings or damaged finishing seals.
• Inspect accessible bonding areas: Investigate separation or loose components.
• Review changes nearby: Check whether later building work has disturbed the installation.
• Record the installation: Retain the product identity, joint location and relevant assembly details.
• Repair the complete detail: Restore the specified arrangement rather than covering visible damage alone.

Why Choose Nassguard for Silicate Adhesive in Saudi?

Nassguard provides a point of contact for FO142 Intutac enquiries across Saudi Arabia. Clear project information helps make ordering and material planning more accurate.

• Order the correct grade: Specify FO142 Brush Grade when brush application is required.
• Plan quantities around the work: Include the joint length, bonding area and expected application waste.
• Identify associated materials: State whether the enquiry includes FJ203 rope or a finishing sealant.
• Coordinate delivery requirements: Provide the project location and required delivery date when requesting a quotation.

Frequently Asked Questions

1. What is FO142 Intutac used for?
It bonds suitable fire-protection materials, including FJ203 woven rope in concrete joints and compatible rock fibre boards.

2. Is FO142 an acrylic sealant?
No. FO142 is a silicate adhesive used for bonding. Its composition and application differ from acrylic caulk.

3. What temperature can FO142 withstand?
Its maximum continuous service temperature is +1000°C. This temperature figure does not establish a fire-resistance duration for a complete assembly.

4. Does FO142 alone provide four-hour fire protection?
A fire rating belongs to the tested joint assembly. The adhesive alone does not establish a four-hour rating.

5. How does FO142 differ from FO143?
FO142 is brush-applied, while FO143 is gun-applied. Select the grade required by the application.

6. Is adhesive necessary for every FJ203 joint?
No. The referenced FJ203 arrangement requires adhesive for expansion joints, while its static-joint arrangement does not.

7. What details should I provide when ordering?
Share the application, substrate, joint dimensions, quantity and delivery location, along with any specified system components.

Conclusion

FO142 Intutac Brush Grade Silicate Adhesive offers a practical bonding solution for suitable high-temperature fire-protection applications. Its brush application, fast setting and compatibility with specified components make it useful when the installation calls for a silicate-based bond.

For Silicate Adhesive in Saudi, contact Nassguard with your project requirements. Matching the adhesive to the substrate and complete joint arrangement helps ensure that purchasing and installation follow the intended design.