Ansell 80 658 in Jeddah | Ansell ActivArmr 80 658 Supplier Jeddah

Ansell 80 658 in Jeddah is a heavy-duty protective glove designed for demanding work where employees need a combination of cut resistance, heat protection, grip and extended wrist and forearm coverage. The glove uses a multi-layer knitted liner with stainless steel, nylon, fiber glass, cotton and aramid, along with a natural rubber latex coating. Nassguard supplies Ansell ActivArmr 80-658 in Jeddah, Riyadh, Dammam, Jubail and Al Khobar, as well as across Saudi Arabia.

What Is Ansell 80 658 in Jeddah?

The ActivArmr 80-658 is a high-performance industrial glove for workers who handle sharp, rough or warm materials. The glove was previously known as PowerFlex 80-658 and now forms part of the ActivArmr range.

Its construction combines several protective materials to create a durable glove for heavy-duty handling. The liner contains stainless steel, nylon, fiber glass, cotton and aramid. This combination provides EN ISO E cut resistance and helps protect the hands when workers handle sharp-edged materials.

The glove also provides EN 407 Level 2 contact heat resistance, with protection against contact heat up to 250°C under the specified test conditions. This makes it useful when workers handle warm components, although it should not be treated as protection for continuous exposure to high temperatures.

One of the main advantages of Ansell 80 658 in Jeddah is its grip. The glove uses a natural rubber latex coating with a raised crinkle finish, which provides grip in both dry and wet conditions. This helps workers maintain control when handling metal sheets, glass and other difficult-to-grip materials.

The glove has an extra-long cuff that extends protection beyond the hand and toward the wrist and forearm. The three-quarter-dipped construction also provides additional coverage and helps repel liquids from the protected area.

The heather-green liner helps hide dirt and marks, which can be useful for maintenance, recycling and industrial handling work.

Key Features of Ansell ActivArmr 80-658

• EN ISO E cut resistance for suitable high cut-risk applications.
• EN 407 Level 2 contact heat resistance up to 250°C under specified test conditions.
• Three-layer protective construction helps provide resistance against cuts, splinters and burns.
• Natural rubber latex coating provides strong grip.
• Raised crinkle finish supports grip in wet and dry conditions.
• Extra-long cuff provides additional wrist and forearm coverage.
• Three-quarter-dipped construction provides extended protection.
• Liquid-repellent cuff helps reduce contact with suitable liquid substances.
• Stainless steel, fiber glass and aramid liner contribute to cut protection.
• Heavy-duty construction suits demanding handling work.
• Dirt-masking green liner helps hide visible dirt.
• Washable design supports suitable cleaning and repeated use.
• Available in sizes 6 to 11.
• Suitable for construction, glass manufacturing, automotive and recycling industries.
• Designed for heavy-duty handling, jagged metal, glass sheets and metal sheets.

Ansell 80 658 in Jeddah: Key Uses and Applications

Ansell 80 658 in Jeddah can support industrial operations where workers face a combination of sharp materials, abrasion and moderate contact heat.

• Jagged metal handling: Helps protect hands when workers handle sharp-edged metal.
• Metal sheet handling: Suitable for moving and positioning metal sheets.
• Glass sheet handling: Provides cut protection during appropriate glass-handling operations.
• Automotive work: Suitable for selected automotive component-handling tasks.
• Construction: Supports heavy-duty handling and material movement.
• Glass manufacturing: Useful for handling suitable glass sheets and components.
• Recycling operations: Provides hand protection when workers handle appropriate recyclable materials.
• Dry metal cutting: Supports handling of dry, painted or galvanised metal pieces.
• Heavy-duty material handling: Useful where workers need protection without losing practical hand sensitivity.
• Warm component handling: Suitable for selected applications involving warm components within its tested heat limits.
• Industrial maintenance: Supports suitable maintenance tasks involving sharp or rough components.
• Material loading and unloading: Useful for selected handling and movement activities.

In Jeddah and Riyadh, the glove can support construction, automotive, fabrication, glass and general industrial work. In Dammam and Jubail, it can suit selected industrial, metal-handling, manufacturing and recycling applications. Nassguard also supplies Ansell ActivArmr 80-658 in Al Khobar and across Saudi Arabia.

Choosing Ansell 80 658 in Jeddah

When choosing Ansell 80 658 in Jeddah, consider the actual material, temperature and handling conditions in the workplace.

The glove works particularly well when a job involves sharp materials and moderate contact heat at the same time. The combination of stainless steel, fiber glass and aramid in the liner provides the cut-resistant structure, while the latex coating gives workers a firm grip.

The raised crinkle finish is useful when workers handle materials in wet or dry conditions. A secure grip can help workers maintain control of metal sheets, glass and other components.

The extra-long cuff provides another advantage. Standard gloves leave more of the wrist exposed, while this design extends farther along the forearm. This makes it useful when workers need additional coverage during material handling.

The glove provides contact heat protection up to 250°C under the applicable EN 407 test conditions. Workers should not use this rating to assume protection during prolonged contact with hot materials. The actual application, exposure time and temperature must remain within the appropriate safety requirements.

Because the coating contains natural rubber latex, workplaces should consider latex sensitivity when selecting the glove.

Correct sizing also matters. A glove that fits properly provides better dexterity and grip. Workers should inspect the gloves before each use and replace them when significant cuts, tears, excessive wear or coating damage affects protection.

Certifications, Standards and Compliance

• EN 388:2016 + A1:2018 – Protective Gloves Against Mechanical Risks – Mechanical protection standard covering abrasion, cut, tear and puncture performance.
• EN 407:2020 – Protective Gloves Against Thermal Risks – Standard for gloves designed to provide protection against thermal hazards.
• EN ISO 21420:2020 – Protective Gloves: General Requirements – Covers general requirements for glove design, ergonomics, sizing, marking and information.
• ANSI/ISEA 105-2024 – Hand Protection Classification – Provides performance classifications for hand protection, including cut resistance.
• CE Marking – Personal Protective Equipment – Indicates conformity with applicable European Union requirements.
• REACH – EU Chemicals Regulation – Addresses chemical safety and restricted substances applicable to products placed on the EU market.

FAQs About Ansell 80 658 in Jeddah

1. What is Ansell ActivArmr 80-658 used for?
It is designed for heavy-duty handling, particularly when workers handle jagged metal, glass sheets, sharp-edged objects and metal sheets.

2. Does ActivArmr 80-658 provide cut protection?
Yes. The glove provides EN ISO E cut resistance and an EN 388 XX43E mechanical protection rating.

3. How much heat can Ansell ActivArmr 80-658 handle?
The glove provides EN 407 Level 2 contact heat protection up to 250°C under the specified test conditions. It does not mean that the glove provides unlimited protection at 250°C.

4. Does the glove provide a good grip in wet conditions?
Yes. Its natural rubber latex coating and raised crinkle finish provide grip in both wet and dry conditions.

5. Does the cuff protect the forearm?
The extra-long cuff extends protection beyond the wrist and provides additional forearm coverage compared with a standard-length glove.

6. Is ActivArmr 80-658 suitable for glass handling?
Yes. Ansell lists glass sheet and sharp-edged object handling among the recommended applications.

7. Where can I buy Ansell ActivArmr 80-658 in Saudi Arabia?
Nassguard supplies Ansell ActivArmr 80-658 in Jeddah, Riyadh, Dammam, Jubail and Al Khobar, as well as across Saudi Arabia.

Conclusion

Ansell 80 658 in Jeddah is a heavy-duty protective glove for workers who need a combination of cut resistance, contact heat protection, strong grip and extended wrist coverage.

Its liner combines stainless steel, nylon, fiber glass, cotton and aramid, while the natural rubber latex coating provides a raised crinkle surface for reliable handling in wet and dry conditions. The EN ISO E cut resistance makes it suitable for specified high cut-risk applications, while the EN 407 Level 2 contact heat rating supports handling of warm components within its tested limits.

The extra-long cuff gives additional wrist and forearm coverage, making the glove useful for heavy-duty handling tasks involving metal, glass and other sharp materials.

It can support construction, glass manufacturing, automotive, recycling, metal handling and industrial maintenance applications across Saudi Arabia.

For businesses looking for Ansell 80 658 in Jeddah, Nassguard supplies the glove in Jeddah, Riyadh, Dammam, Jubail, Al Khobar, and across Saudi Arabia.