The Hydraulic Wedge Spreader in Jeddah provides controlled hydraulic force for separating components in tight and difficult-to-access spaces. The Hydraulic Wedgie and Spread Cylinder WR15 delivers a maximum spreading force of 6 kN (0.75 ton) and can spread its jaws up to 292 mm. Its long 32 mm stroke makes it suitable for spreading applications that require controlled movement and extended jaw travel.
The WR15 uses a single-acting, spring-return design. Hydraulic pressure drives the spreading action, while the spring returns the tool after pressure release. Nassguard supplies the Hydraulic Wedge Spreader across Saudi Arabia, including Jeddah, Riyadh, Dammam, Jubail, and Al Khobar, for suitable maintenance, mechanical, industrial, and heavy-equipment applications.
A hydraulic wedge spreader is a mechanical tool that uses hydraulic pressure to generate controlled spreading force. The operator connects the tool to a compatible hydraulic power source. Hydraulic pressure then drives the wedge mechanism and separates the jaws.
The WR15 works particularly well when workers need to create or maintain a gap between components. Its 292 mm maximum spread provides substantial jaw movement for a compact hydraulic spreading tool.
The tool delivers 6 kN of maximum spreading force, equivalent to approximately 0.75 ton. Its 32 mm stroke supports long-stroke spreading applications.
The spring-return mechanism retracts the tool after the hydraulic pressure drops. This makes the single-acting design straightforward for suitable spreading operations.
A hydraulic spreading tool converts hydraulic pressure into mechanical spreading force.
The operator connects the WR15 to a compatible hydraulic pump and positions the spreading tips at the required point. The hydraulic system then supplies pressure to the cylinder.
As pressure increases within the cylinder, the wedge mechanism moves and pushes the jaws apart. This action creates a controlled gap between the components.
The WR15 provides a 32 mm stroke and a maximum spread of 292 mm. After the operator releases hydraulic pressure, the spring-return mechanism retracts the tool.
Users should always work within the specified force, pressure, stroke, and application limits. The supplied specifications also state that the maximum system pressure must be limited to 350 bar (5,000 psi) for the stated maximum load condition. Operators should follow the manufacturer’s instructions and applicable hydraulic safety procedures.
The WR15 provides a practical solution when workers need controlled spreading force without relying on manual wedges or mechanical levers.
Its hydraulic operation allows the operator to apply force in a controlled manner. The long-stroke design also helps when the application requires significant jaw movement.
The 292 mm maximum spread gives the tool useful working range for suitable maintenance and separation tasks.
Its single-acting, spring-return construction keeps the operating principle straightforward. Hydraulic pressure drives the tool forward, while the internal spring handles retraction.
At 11.3 kg, the WR15 remains manageable for suitable workshop and field applications, although users should consider the tool weight and working position before handling it.
The Hydraulic Wedge Spreader in Jeddah suits a range of industrial, mechanical, maintenance, and equipment-handling applications.
Maintenance teams can use a hydraulic spreader tool when they need to separate suitable components during repair or servicing work.
Facilities in Jeddah, Dammam, and Jubail can use hydraulic spreading equipment for appropriate maintenance tasks involving machinery and industrial systems.
The controlled spreading action can assist mechanics during suitable repair and component-separation operations. The hydraulic force reduces the need for manual spreading methods.
Hydraulic wedge tools can support suitable flange spreading tasks where controlled separation helps create access for inspection, maintenance, or component replacement.
Users must confirm that the WR15’s force, spread range, and tip configuration match the specific flange application.
Technicians working with suitable heavy equipment can use hydraulic spreading tools during maintenance and repair operations where component separation forms part of the procedure.
Industrial maintenance projects across Riyadh and Al Khobar may require controlled spreading equipment for suitable mechanical applications.
The wedge-style mechanism makes the WR15 useful for selected applications where workers need to introduce a spreading tool into a restricted gap.
Hydraulic tools can generate significant force. Operators should inspect the tool, hydraulic hoses, fittings, and connections before use.
Never exceed the manufacturer’s specified operating limits. The supplied information lists 700 bar as the maximum operating pressure, while also stating that the system pressure must remain limited to 350 bar (5,000 psi) for the stated maximum load condition.
Users should position the spreading tips securely before applying pressure. Keep hands, fingers, and other body parts away from the moving jaws and the area between components.
Operators should also wear suitable personal protective equipment and follow the hydraulic equipment manufacturer’s operating instructions.
The WR15 requires a compatible hydraulic power source. Before operation, users should check the hydraulic connections and confirm that the pump and accessories match the tool’s requirements.
Position the spreading tips correctly before applying hydraulic pressure. Avoid uneven loading because incorrect positioning can affect tool stability and performance.
Operators should also check the available working clearance. The tool provides a 32 mm tip clearance and up to 292 mm maximum spread, so the application should accommodate the tool’s operating range.
After completing the spreading operation, release the hydraulic pressure and allow the spring-return mechanism to retract the tool.
Specific certification and compliance documentation should be confirmed for the supplied hydraulic tool and its intended application.
Nassguard supplies the Hydraulic Wedge Spreader in Saudi Arabia for suitable industrial, mechanical, maintenance, and equipment applications.
The Hydraulic Wedge Spreader in Jeddah is available across:
Nassguard supplies hydraulic spreading tools across Saudi Arabia according to the required application and specifications.
1. What is a hydraulic wedge spreader?
A hydraulic wedge spreader uses hydraulic pressure to generate controlled force for separating suitable components.
2. What is the maximum spreading force of the WR15?
The WR15 provides a maximum spreading force of 6 kN, or 0.75 ton.
3. How far can the WR15 spread?
The maximum spread reaches 292 mm.
4. What is the stroke length?
The WR15 has a 32 mm stroke.
5. Does the WR15 have a spring-return system?
Yes, the single-acting tool uses a spring-return mechanism for retraction.
6. What is the weight of the hydraulic spreader?
The WR15 weighs 11.3 kg.
7. Where can I buy a Hydraulic Wedge Spreader in Jeddah?
Nassguard supplies the Hydraulic Wedgie and Spread Cylinder in Jeddah and across Saudi Arabia.
The Hydraulic Wedgie and Spread Cylinder WR15 provides controlled hydraulic spreading force for suitable mechanical and industrial applications. Its 6 kN spreading force, 292 mm maximum spread, and 32 mm stroke make it suitable for long-stroke spreading work, including selected maintenance and component-separation tasks.
The single-acting, spring-return design keeps operation straightforward, while the hydraulic power source provides controlled spreading movement. Users should always follow the manufacturer’s pressure and load limitations and select the tool according to the requirements of the application.
Nassguard supplies the Hydraulic Wedge Spreader in Jeddah and across Riyadh, Dammam, Jubail, Al Khobar, and Saudi Arabia for suitable hydraulic spreading and industrial maintenance requirements.
| Specification | Details |
|---|---|
| Product Name | Hydraulic Wedgie and Spread Cylinder |
| Model | WR15 |
| Tool Type | Hydraulic Wedge Spreader |
| Power Source | Hydraulic |
| Maximum Operating Pressure | 700 bar |
| Maximum System Pressure for Stated Maximum Load | 350 bar / 5,000 psi |
| Maximum Spreading Force | 6 kN / 0.75 ton |
| Maximum Spread | 292 mm |
| Stroke | 32 mm |
| Tip Clearance | 32.0 mm |
| Cylinder Effective Area | 14.5 cm² |
| Return System | Spring Return |
| Action | Single-Acting |
| Weight | 11.3 kg |
| Main Application | Long-Stroke Spreading Applications |
