Ansell 48 939 in Jeddah | Ansell EDGE 48 939 Supplier in Jeddah

Ansell 48 939 in Jeddah is a medium-duty cut-resistant work glove designed for industrial handling where workers may deal with sharp edges, oily components, rough surfaces and general mechanical hazards. Its nitrile coating provides grip, while the extended gauntlet design gives additional coverage around the wrist and lower forearm. Nassguard supplies Ansell EDGE 48-939 in Jeddah, Riyadh, Dammam, Jubail and Al Khobar, as well as across Saudi Arabia.

What Is Ansell 48 939 in Jeddah?

The Ansell EDGE 48-939 is an industrial protective glove that combines cut resistance, abrasion resistance, grip and oil-repellent protection in one design.

The glove uses a 13-gauge knitted liner made with polyester, HPPE and spandex. This liner provides the base for the glove’s mechanical protection while allowing the hand to move during regular industrial tasks.

The palm and working areas use a nitrile coating with a rough finish. This surface helps workers maintain control when handling parts, tools and materials, particularly where oil or other slippery substances are present.

A major feature of Ansell 48 939 in Jeddah is the gauntlet-style cuff. Compared with a short-cuff work glove, the extended design provides more coverage around the wrist and lower forearm. It can also make the glove easier to put on and remove during work.

The glove provides ANSI/ISEA 105-2024 A4 cut resistance and an EN 388:2016 + A1:2018 rating of 4X43D. It also has an EN 407 X1XXXX thermal rating for suitable contact-heat applications.

This combination makes the glove suitable for industrial tasks where workers need protection from cuts, abrasion and oily handling conditions without moving to an excessively bulky glove.

Key Features of Ansell EDGE 48-939

• ANSI A4 cut resistance for suitable industrial cut hazards.
• EN 388 4X43D mechanical protection rating.
• EN 407 X1XXXX thermal protection classification.
• Nitrile coating provides grip during industrial handling.
• Rough palm finish improves control over parts and tools.
• Gauntlet cuff provides additional wrist and lower-forearm coverage.
• Polyester, HPPE and spandex liner provides the knitted protective base.
• 13-gauge construction balances protection and flexibility.
• Abrasion resistance supports repeated contact with work surfaces.
• Oil-repellent working surface suits suitable oily handling applications.
• Latex-free construction suits workplaces that avoid natural rubber latex.
• Medium-duty design suits regular industrial handling.
• Contact heat protection supports selected warm-component handling.
• Available in sizes 6 to 12.
• Suitable for machining, stamping, cutting, grinding and assembly.
• Suitable for selected maintenance, glass and metal-handling applications.

Ansell 48 939 in Jeddah: Key Uses and Applications

Ansell 48 939 in Jeddah can support industrial jobs where workers encounter a combination of sharp edges, oily surfaces and mechanical handling hazards.

• Machining: Suitable for handling appropriate components during machining operations.
• Stamping: Supports workers during suitable stamping and component-handling tasks.
• Cutting: Provides hand protection during appropriate cutting operations.
• Grinding: Useful when handling parts with rough or sharp edges.
• Parts assembly: Supports repetitive assembly work involving industrial components.
• Maintenance: Suitable for selected machinery and equipment maintenance tasks.
• Metal handling: Helps protect hands when workers handle sharp or rough metal parts.
• Glass handling: Suitable for selected glass-sheet handling applications.
• Automotive work: Supports suitable vehicle-component handling and maintenance.
• Industrial production: Useful for selected manufacturing and production activities.
• Oil-contaminated handling: The nitrile coating helps maintain grip when surfaces are oily.
• Equipment handling: Supports workers handling industrial machinery and components.

In Jeddah and Riyadh, these gloves can support automotive workshops, manufacturing facilities, maintenance teams, fabrication operations and general industrial work. In Dammam and Jubail, they can suit selected energy, machinery, metal-handling and industrial maintenance applications. Nassguard also supplies Ansell EDGE 48-939 in Al Khobar and across Saudi Arabia.

Choosing Ansell 48 939 in Jeddah

When selecting Ansell 48 939 in Jeddah, businesses should consider the actual working conditions rather than relying on a single protection rating.

The glove is useful when cut hazards and oily handling conditions occur together. The nitrile-coated working surface provides grip and helps workers maintain control of tools and components.

The gauntlet cuff provides additional coverage compared with a standard short-cuff glove. This can be useful when workers handle oily or dirty materials that may come into contact with the wrist and lower forearm.

The HPPE-containing liner contributes to cut resistance, while the polyester and spandex construction supports flexibility. This combination makes the glove suitable for jobs that require regular finger movement.

The glove also carries an EN 407 X1XXXX classification, providing a specified level of contact-heat performance. Users should consider temperature and contact duration before selecting the glove for hot-material handling.

The glove is not intended to replace specialist chemical, electrical or severe-impact protection. Where workers face additional hazards, the PPE selection should match those specific risks.

Proper sizing also matters. A correctly fitted glove helps workers maintain dexterity and grip. Workers should inspect gloves before use and replace them when significant wear, cuts, tears or coating damage affects protection.

Certifications, Standards and Compliance

• EN 388:2016 + A1:2018 – Protective Gloves Against Mechanical Risks – Mechanical protection classification.
• EN ISO 21420:2020 – Protective Gloves: General Requirements – General requirements for protective glove design and performance.
• EN 407:2020 – Protective Gloves Against Thermal Risks – Thermal protection classification.
• ANSI/ISEA 105-2024 – Hand Protection Classification – Includes the A4 cut-resistance classification.
• CE Marking – Personal Protective Equipment – Applicable European conformity requirements.
• REACH – EU Chemicals Regulation – Chemical and restricted-substance requirements.

FAQs About Ansell 48 939 in Jeddah

1. What is Ansell EDGE 48-939 used for?
It is designed for industrial work involving cut hazards, abrasion, oily surfaces and general mechanical handling.

2. What cut protection does EDGE 48-939 provide?
The glove provides ANSI/ISEA 105-2024 A4 cut resistance and an EN 388 4X43D mechanical protection classification.

3. Is EDGE 48-939 suitable for oily work?
Yes. Its nitrile coating and rough finish provide grip for suitable oily handling applications.

4. What is the purpose of the gauntlet cuff?
The extended cuff provides additional coverage around the wrist and lower forearm and can help reduce direct contact with oily or dirty materials.

5. Can EDGE 48-939 be used for hot components?
It provides a specified EN 407 contact-heat rating. Workers should check the actual temperature and contact duration before selecting it for a particular hot-handling task.

6. Is the EDGE 48-939 latex-free?
Yes, the glove is listed as latex-free.

7. Where can I buy Ansell EDGE 48-939 in Saudi Arabia?
Nassguard supplies Ansell EDGE 48-939 in Jeddah, Riyadh, Dammam, Jubail and Al Khobar, as well as across Saudi Arabia.

Conclusion

Ansell 48 939 in Jeddah is a medium-duty industrial glove designed for workers who need a combination of cut resistance, abrasion protection and grip in oily working conditions.

Its polyester, HPPE and spandex liner provides the protective base, while the nitrile coating gives workers a firm gripping surface. The gauntlet cuff adds extended wrist and lower-forearm coverage, making the glove practical for jobs involving oily components and sharp materials.

The glove provides ANSI A4 cut resistance, EN 388 4X43D mechanical protection and EN 407 thermal performance. It can support applications including machining, stamping, cutting, grinding, parts assembly, maintenance, metal handling and selected glass-handling work.

For businesses looking for Ansell 48 939 in Jeddah, Nassguard supplies the gloves in Jeddah, Riyadh, Dammam, Jubail and Al Khobar, as well as across Saudi Arabia.