Waterproof pH Meter in Saudi | Waterproof pH Meter Supplier KSA

The Extech PH100 Waterproof pH Meter in Saudi provides portable pH and temperature measurements for water testing, maintenance and routine sample checks. Its flat-surface electrode, digital display and automatic temperature compensation help users take measurements without carrying a separate bench instrument.

Nassguard supplies the Extech PH100 ExStik® pH Meter across Riyadh, Dammam, Jubail, Jeddah and Al Khobar. With 15-reading memory, calibration reminders and a replaceable electrode, it offers practical features for technicians who test samples at different locations.

What Is the Extech PH100 Waterproof pH Meter?

The Extech PH100 is a handheld instrument that measures how acidic or alkaline a sample is. Its measurement range covers 0.00–14.00 pH, with 0.01 pH resolution.

The display shows pH and temperature together, while an analogue bar graph indicates movement towards acidic or alkaline conditions. Readings flash during stabilisation, helping users recognise when the measurement is ready to record.

Its flat-surface electrode supports convenient sample contact. However, the sensing membrane is glass and requires careful handling. For solid or semi-solid samples, use an appropriate sample-preparation method that provides moist contact without pressing the electrode into a hard surface.

Key Features of the Extech PH100

The PH100 digital pH meter combines portable operation with features that support calibration, measurement and electrode care.

• Full pH measurement range: Measures from 0.00 to 14.00 pH.
• Flat-surface electrode: Provides a convenient sensing surface for suitable prepared samples.
• Automatic temperature compensation: Compensates for the temperature-dependent response of the pH electrode.
• Simultaneous display: Shows pH and sample temperature on one screen.
• One-, two- or three-point calibration: Automatically recognises pH 4, 7 and 10 buffers.
• 15-reading memory: Stores and recalls numbered measurements for later review.
• CAL and RENEW indicators: Prompt users to assess calibration needs and electrode condition.
• IP57 waterproof design: Provides ingress protection for wet working environments when the instrument is correctly assembled.

Applications of Waterproof pH Meters in Saudi

The Extech PH100 supports routine pH checks where its electrode compatibility, accuracy and operating limits match the sample.

• Water treatment in Riyadh: Check sample pH during routine process inspections.
• Facility maintenance in Jeddah: Test suitable water-system samples during maintenance rounds.
• Industrial water monitoring in Dammam: Compare readings before and after treatment adjustments.
• Process sample checks in Jubail: Measure compatible aqueous samples under established testing procedures.
• Commercial facilities in Al Khobar: Support local water-testing requirements.
• Swimming pool maintenance: Check pool-water pH; chlorine measurement requires a separate suitable electrode.
• Hydroponic systems: Monitor nutrient-solution pH alongside other required water-quality measurements.
• Training and laboratory work: Demonstrate calibration, sample testing and pH comparison.

Certifications, Standards and Compliance

• CE Marking — Extech PH100 Declaration of Conformity: Declares conformity with the European requirements identified for the PH100.
• EN 61326-1 — Electromagnetic Compatibility: Listed for electromagnetic compatibility requirements applicable to measurement, control and laboratory equipment.
• RoHS Directive 2011/65/EU: Included for restrictions on specified hazardous substances in electrical and electronic equipment.

Calibrating and Using the Waterproof pH Meter

Consistent pH measurements depend on electrode condition, fresh buffers and careful sample handling.

• Condition the electrode: Before first use or after extended storage, soak it in pH 4 solution for approximately 10 minutes.
• Use fresh buffer portions: Keep calibration solutions clean and avoid returning used portions to their original containers.
• Start with pH 7: Then calibrate at pH 4 or pH 10, according to the expected sample value.
• Rinse between solutions: Reduce carryover between buffers and samples.
• Wait for stability: Allow the reading to settle before storing or recording it.
• Use Data Hold when needed: Capture a reading for review in the numbered memory.
• Record sample details: Note the sample identity, temperature and test time alongside the result.

Electrode Care, Inspection and Maintenance

Proper care helps preserve the pH electrode and reduce avoidable measurement problems.

• Keep the protective-cap sponge moist with pH 4 solution during storage.
• Protect the glass membrane from impact, scraping and pressure.
• Clean deposits gently using a method suitable for the electrode and contamination.
• Check the electrode collar and seals before use in wet environments.
• Respond to CAL reminders and verify performance against suitable buffers.
• Investigate persistent RENEW warnings: Replace the electrode if cleaning and recalibration do not resolve the warning.
• Recalibrate after battery replacement: Removing the batteries clears stored readings and user calibration data.
• Remove batteries for extended storage, keeping button cells securely away from children.

Why Choose Nassguard for Waterproof pH Meters in Saudi?

Nassguard supports customers sourcing portable water-testing instruments for maintenance, facilities and project requirements.

• Model-specific quotations: Request the Extech PH100 with your required quantity.
• Accessory coordination: Include calibration buffers, sample cups and replacement electrodes in your enquiry.
• Application details: Specify the sample type and expected pH range before ordering.
• Saudi supply coverage: Enquire from Riyadh, Dammam, Jubail, Jeddah and Al Khobar.

Frequently Asked Questions

1. What does the Extech PH100 measure?
It measures pH and sample temperature.

2. What is its pH measurement range?
The range is 0.00–14.00 pH, with 0.01 pH resolution.

3. Is the PH100 waterproof?
Yes, it has an IP57 rating when correctly assembled with its caps and seals secured.

4. Does it include calibration buffers?
No, pH calibration buffers are ordered separately.

5. Can I replace the pH electrode?
Yes, the PH105 replacement electrode is available for the PH100.

6. Does it measure chlorine and ORP as supplied?
The standard pH electrode measures pH; chlorine or ORP testing requires the appropriate optional electrode.

7. What is the Extech PH100 price in Saudi?
Contact Nassguard for a quotation covering quantity, buffers, accessories and delivery location.

Conclusion

The Extech PH100 ExStik® Waterproof pH Meter combines portable pH testing with temperature measurement, numbered memory and replaceable-electrode convenience. Its calibration functions and condition indicators help users maintain a consistent testing routine.

For a Waterproof pH Meter in Saudi, contact Nassguard with your sample type, quantity and accessory requirements. Fresh buffers, correct calibration and careful electrode storage help you get useful measurements throughout the instrument’s working life.