The Haws Back Panel in Jeddah provides a practical and clean-looking wall protection solution for compatible Haws bottle fillers and water fountain systems. The Haws BP15 Back Panel uses durable stainless steel with a satin finish. It helps protect the wall behind the bottle filler from accidental water splashes while giving the installation a neat appearance.
The BP15 measures 15 × 17 inches (38 × 43 cm) and suits the Haws Model 1920 bottle filler. It also works with selected Haws 1001, 1107, and 1109 series models.
Nassguard supplies the Haws BP15 Back Panel across Saudi Arabia, including Jeddah, Riyadh, Dammam, Jubail, and Al Khobar. It suits commercial buildings, workplaces, schools, healthcare facilities, public areas, hospitality locations, and other sites with compatible Haws water dispensing equipment.
The Haws BP15 Back Panel is a stainless steel wall panel designed for compatible Haws bottle fillers and drinking fountain installations.
The panel sits behind the bottle filler and creates a protective surface between the equipment and the wall. It helps shield the wall from water splashes that can occur during regular bottle filling and water dispensing.
The panel also improves the appearance of the installation. Its satin stainless steel finish gives the area a clean and professional look.
The BP15 measures 15 × 17 inches, or approximately 38 × 43 cm. Haws designed it primarily for the Model 1920 bottle filler and also lists compatibility with selected 1001, 1107, and 1109 series fountain models.
A bottle filler back panel sits behind a compatible bottle filling station or water fountain. It creates a protective surface between the equipment and the surrounding wall.
When users fill bottles, small amounts of water may splash around the dispensing area. Without suitable wall protection, repeated moisture can affect the surrounding wall surface.
The Haws BP15 helps shield this area. Its stainless steel surface also provides a practical material for locations that need regular cleaning.
The panel does not replace the bottle filler or drinking fountain. Instead, it works as an accessory that supports the installation.
A stainless steel back panel can improve both the appearance and practicality of a bottle filling installation.
The BP15’s satin finish provides a neat appearance behind the equipment. Stainless steel also offers a durable surface for suitable commercial and public environments.
The panel can help protect the wall from water splashes around the bottle filler. This can make cleaning easier because maintenance personnel can clean the panel rather than dealing with water marks directly on the wall surface.
The BP15 also provides a useful replacement option when an existing back panel becomes damaged or requires replacement.
The Haws Back Panel in Jeddah suits a range of locations where compatible Haws bottle fillers and drinking fountains operate.
Commercial buildings in Jeddah, Riyadh, and Al Khobar can use the BP15 behind compatible Haws bottle fillers. The stainless steel panel helps create a clean and professional installation.
Workplaces can install compatible bottle filling stations in employee refreshment and common areas. The BP15 can provide wall protection around the dispensing point.
Schools and educational facilities can use compatible Haws water fountains and bottle fillers in high-use areas. A bottle filler wall panel can help protect the wall behind the equipment.
Hospitals, clinics, and healthcare facilities can use suitable Haws drinking water equipment in staff and public areas. The stainless steel surface provides a practical finish for installations that require regular cleaning.
Hotels and hospitality facilities can use the BP15 with compatible water dispensing equipment. The satin finish can complement modern interior environments.
Public buildings and other high-traffic facilities can use suitable Haws bottle fillers to provide drinking water access. The BP15 adds a protective surface around the installation.
The Haws BP15 provides compatibility with selected Haws equipment.
The supplied product information identifies the following compatible models and series:
Users should confirm the exact fountain or bottle filler model before ordering. Compatibility can depend on the specific equipment configuration.
The stainless steel surface makes the Haws BP15 practical for routine cleaning. Maintenance teams can wipe the panel regularly to remove water marks, dust, fingerprints, and other surface contaminants.
Users should follow suitable cleaning procedures for stainless steel and avoid cleaning products that could damage the finish.
Regular inspection can also help identify loose mounting hardware, physical damage, or other installation issues.
Specific certification and compliance documentation should be confirmed for the supplied Haws BP15 and the complete bottle filler or fountain system.
Nassguard supplies the Haws BP15 Back Panel in Saudi Arabia for compatible bottle filler and water fountain installations.
The Haws Back Panel in Jeddah is available across:
Nassguard supplies Haws bottle filler parts and water fountain accessories across Saudi Arabia for suitable compatible equipment.
1. What is the Haws BP15 Back Panel?
The Haws BP15 is a stainless steel back panel designed for compatible Haws bottle fillers and water fountains.
2. What are the dimensions of the BP15?
The panel measures 15 × 17 inches, approximately 38 × 43 cm.
3. What material does the Haws BP15 use?
The BP15 uses stainless steel with a satin finish.
4. What is the main purpose of the back panel?
It helps protect the wall behind a compatible bottle filler from accidental water splashes.
5. Which Haws bottle filler uses the BP15?
The BP15 is designed for the Haws Model 1920 bottle filler and also works with selected 1001, 1107, and 1109 series models.
6. Can the BP15 replace an existing back panel?
Yes, it can serve as a replacement panel when it matches the existing compatible Haws equipment.
7. Where can I buy a Haws Back Panel in Jeddah?
Nassguard supplies the Haws BP15 Back Panel in Jeddah and across Saudi Arabia.
The Haws BP15 Back Panel provides a practical wall protection accessory for compatible Haws bottle fillers and water fountain systems. Its stainless steel construction, satin finish, and 15 × 17 inch dimensions make it suitable for installations that need a durable and clean-looking protective surface.
The BP15 helps protect the wall behind the bottle filler from accidental water splashes while improving the overall appearance of the installation. Its compatibility with the Haws Model 1920 and selected 1001, 1107, and 1109 series models makes it a useful replacement and installation accessory.
Nassguard supplies the Haws Back Panel in Jeddah and across Riyadh, Dammam, Jubail, Al Khobar, and other locations throughout Saudi Arabia.
| Specification | Details |
|---|---|
| Product Name | Haws BP15 Back Panel |
| Model | BP15 |
| Product Type | Bottle Filler / Water Fountain Back Panel |
| Material | Stainless Steel |
| Finish | Satin Finish |
| Dimensions | 15 × 17 in |
| Approx. Dimensions | 38 × 43 cm |
| Primary Compatibility | Haws Model 1920 |
| Additional Compatibility | Haws 1001, 1107 and 1109 Series |
| Main Function | Wall Splash Protection |
| Application | Bottle Fillers and Water Fountains |
