The Hard Hat Cooling Pad in Jeddah provides a simple way to add evaporative cooling to suitable hard hat and helmet setups. The Evaporative Cooling Crown Cooler uses HyperKewl™ PLUS fabric to retain water and gradually release moisture through evaporation, helping reduce heat discomfort during outdoor work.
The cooling insert attaches to a compatible hard hat liner using a hook-and-loop fastening system. Its lightweight construction includes a polyester mesh exterior, HyperKewl™ PLUS interior, and water-repellent nylon liner. One soaking can provide approximately 5–10 hours of cooling relief, depending on environmental conditions.
Nassguard supplies the Evaporative Cooling Crown Cooler across Saudi Arabia, including Jeddah, Riyadh, Dammam, Jubail, Al Khobar, and other locations.
A hard hat cooling pad is an evaporative cooling accessory designed to provide additional cooling around the head when used with a compatible helmet or hard hat liner.
The Crown Cooler contains HyperKewl™ PLUS fabric, which absorbs and holds water after activation. As the water evaporates, it creates a cooling effect around the head.
Unlike powered cooling systems, this evaporative cooling liner does not require batteries, charging, or electrical connections. This makes it convenient for outdoor work where users may spend extended periods away from power sources.
The product is supplied as a cooling accessory. The hard hat is not included.
The Crown Cooler requires water activation according to the manufacturer’s recommended procedure. After soaking, the HyperKewl™ PLUS interior retains moisture.
As the moisture evaporates, heat moves away from the surrounding area. This creates a cooling sensation that can help improve comfort during hot-weather activities.
One soaking can provide approximately 5–10 hours of cooling relief. The actual duration depends on temperature, humidity, airflow, physical activity, and other environmental conditions.
Hot weather can increase discomfort during outdoor work, particularly when workers wear head protection for long periods. The evaporative cooling hard hat liner provides a water-activated option that does not depend on batteries or electricity.
The Crown Cooler should be used with a compatible hard hat liner and should not interfere with the original fit, suspension system, or protective function of the approved head protection.
Workers should continue to follow workplace heat-management procedures, including hydration, rest breaks, shade, ventilation, and other applicable controls.
Before use, activate the Crown Cooler according to the manufacturer’s recommended soaking procedure. Allow excess water to drain as instructed.
Attach the cooler securely to a compatible hard hat liner using the hook-and-loop fastening system. Check that the insert does not obstruct the hard hat’s suspension or alter its intended fit.
The cooling effect depends on the surrounding conditions. Air movement generally supports evaporation, while high humidity may reduce the cooling rate.
After use, follow the manufacturer’s cleaning, drying, and storage instructions to maintain the product.
When selecting a helmet cooling liner or hard hat cooling insert, check compatibility with the existing headgear before use.
The cooling accessory should not interfere with the helmet’s suspension, adjustment system, ventilation, or protective performance. Users should also check workplace requirements before adding accessories to certified head protection.
For industrial environments, the cooling insert should complement rather than replace approved PPE and established heat-stress controls.
The Crown Cooler is a cooling accessory rather than a replacement for certified head protection. Users should verify compatibility with their specific hard hat or helmet and check the manufacturer’s documentation before workplace use.
For regulated applications, the hard hat itself should meet the applicable head-protection standard required for the work environment.
These references do not confirm that the Crown Cooler itself carries every listed certification. Always verify the manufacturer’s current product documentation and the certification of the hard hat being used.
Nassguard supplies the Evaporative Cooling Crown Cooler across Saudi Arabia for suitable construction, industrial, maintenance, infrastructure, and outdoor applications.
The Hard Hat Cooling Pad in Jeddah is supplied across major Saudi locations:
Nassguard also supplies the hard hat cooling pad across other locations in Saudi Arabia.
1. What is an Evaporative Cooling Crown Cooler?
It is a water-activated cooling insert designed to attach to a compatible hard hat liner.
2. How does the Crown Cooler provide cooling?
Its HyperKewl™ PLUS interior retains water and releases it gradually through evaporation.
3. How long does the cooling effect last?
One soaking can provide approximately 5–10 hours of cooling relief, depending on environmental conditions.
4. Is the hard hat included with the Crown Cooler?
No. The product is supplied as a cooling accessory, and the hard hat is not included.
5. How does the Crown Cooler attach to a hard hat liner?
It uses a hook-and-loop fastening system for attachment to a compatible liner.
6. What size and colour are available?
The product is available in adult size and blue colour.
7. Where can I buy a Hard Hat Cooling Pad in Jeddah?
Nassguard supplies the Evaporative Cooling Crown Cooler in Jeddah and across Saudi Arabia.
The Evaporative Cooling Crown Cooler provides a lightweight, water-activated option for improving cooling comfort while wearing compatible head protection in hot environments. Its HyperKewl™ PLUS interior, polyester mesh exterior, water-repellent liner, and hook-and-loop attachment make it practical for suitable outdoor and industrial activities.
Nassguard supplies the Hard Hat Cooling Pad in Jeddah and across Riyadh, Dammam, Jubail, Al Khobar, and other locations throughout Saudi Arabia.
| Specification | Details |
|---|---|
| Product Name | Evaporative Cooling Crown Cooler |
| Product Type | Hard Hat Cooling Pad / Cooling Insert |
| Cooling Technology | HyperKewl™ PLUS Evaporative Cooling |
| Exterior | Polyester Mesh |
| Interior | HyperKewl™ PLUS Fabric |
| Liner | Water-Repellent Nylon |
| Attachment | Hook and Loop |
| Cooling Duration | Approximately 5–10 Hours per Soaking |
| Size | Adult |
| Colour | Blue |
| Hard Hat | Not Included |
| Activation | Water |
| Applications | Construction, Industrial Work, Outdoor Work, Field Activities |
