The Electric Heater in Jeddah is a compact heating solution for buildings, warehouses, tents, construction sites, accommodation camps, workshops, and other spaces that require controlled electric heating. This Electric Heater uses electric coils to generate heat and an axial fan to distribute warm air into the surrounding area. Its adjustable thermostat helps users control the required temperature, while the 2.5 kW heating capacity provides practical heating for suitable small and medium-sized spaces.
Nassguard supplies Electric Heaters across Saudi Arabia, including Jeddah, Riyadh, Dammam, Jubail, and Al Khobar, as well as other locations.
An Electric Heater converts electrical energy into heat through electric heating coils. The integrated fan then moves air across the heated elements and distributes the warm air into the surrounding space.
Unlike fuel-fired heaters, this design does not require diesel, gas, or other combustion fuels. It can therefore provide a convenient heating option for suitable indoor and temporary spaces where an electrical supply is available.
The heater has a 2.5 kW maximum heating capacity and a one-stage heating system. An adjustable thermostat allows users to regulate the operating temperature according to the conditions of the space.
An Industrial Electric Heater can provide localized heating in areas where workers need additional warmth during colder periods. The compact construction makes it suitable for temporary heating requirements as well as selected permanent work areas.
Suitable locations include:
The heater’s axial fan delivers up to 300 m³/h of air, helping distribute heated air within the operating area.
The Electric Fan Heater combines heating coils with a one-stage axial fan. Air passes through the heated section and exits as warm air.
The adjustable thermostat gives users control over the desired temperature. This helps avoid unnecessary continuous heating when the surrounding area reaches the selected temperature.
The heater can produce a maximum temperature increase of 40°C, depending on operating conditions and the incoming air temperature.
The compact design makes this Portable Industrial Heater suitable for construction and temporary work areas. It weighs approximately 10.6 kg without packaging, allowing suitable personnel to move it between locations when required.
Construction teams can use portable electric heating for:
The heater should always operate on a suitable electrical supply, with adequate clearance around the air inlet and outlet.
An Electric Heater for Warehouse applications can provide localized warmth where low temperatures affect workers or certain suitable operations.
The 300 m³/h maximum airflow helps circulate heated air. A hose connection also allows warm air to travel through a compatible hose where the installation requires more directed airflow.
The supplied specification permits a hose length of up to 7 metres and a hose diameter of 155 mm.
Users should assess the warehouse size, insulation, air movement, door openings, ambient temperature, and required heating level before selecting a heater.
A Commercial Electric Heater can support temporary or localized heating in suitable commercial and accommodation areas. The 2.5 kW heating capacity makes this unit appropriate for applications where a compact heating solution is preferred.
Accommodation camps and temporary buildings can use electric heating where the electrical infrastructure supports the specified voltage and current requirements.
The heater does not use combustion fuel, making it suitable for applications where users prefer electric heat instead of fuel-fired equipment.
An Electric Space Heater can provide a practical solution when heating is required for a specific room or work area rather than an entire building.
The thermostat allows users to regulate the temperature, while the fan distributes warm air. This combination can help heat the selected area more quickly than relying on passive heat transfer.
The heater should remain clear of combustible materials and operate according to the manufacturer’s instructions.
Nassguard supplies the Electric Heater in Jeddah for suitable commercial, industrial, construction, warehouse, accommodation, and temporary heating applications.
Electric Heater in Riyadh
In Riyadh, the heater can suit construction sites, temporary buildings, workshops, warehouses, camps, and other enclosed areas that require localized heating.
Industrial Electric Heaters in Dammam
In Dammam, suitable applications include industrial work areas, maintenance spaces, warehouses, accommodation facilities, and temporary structures.
Electric Fan Heaters in Jubail
The heater can support suitable workspaces and temporary facilities in Jubail, particularly where a compact electric heating unit is required.
Portable Electric Heater in Al Khobar
In Al Khobar, the unit can suit workshops, temporary accommodation, storage spaces, construction areas, and other suitable indoor applications.
Nassguard also supplies Electric Heaters across other locations in Saudi Arabia.
The compact electric heater can serve different sectors and environments:
Actual heating performance depends on room volume, insulation, outdoor temperature, ventilation, and other site conditions.
The heater requires a 230 V / 50 Hz electrical supply and has a nominal current consumption of 10.9 A. The recommended fuse rating is 16 A.
The electrical connection uses a CEE 7/7 plug, with a supplied cable length of 2.6 metres.
Where the hose connection is used, users should maintain the specified 155 mm hose diameter and maximum hose length of 7 metres. Correct airflow helps the heater operate effectively.
The heater should remain on a stable surface with sufficient clearance around the air inlet and outlet. Users should also keep combustible materials away from the heating area.
These references do not confirm certification of this specific heater. Product-specific compliance should always be verified from the manufacturer’s documentation.
1. What is the heating capacity of this Electric Heater?
The heater provides a maximum heating capacity of 2.5 kW, equivalent to approximately 2,150 kcal/h.
2. What electrical supply does the heater require?
It operates on 230 V / 50 Hz electrical mains power.
3. How much air can the heater deliver?
The maximum airflow is 300 m³/h.
4. Does the Electric Heater have temperature control?
Yes. It has an adjustable thermostat that allows users to control the required temperature.
5. Can the heater be used with a hose?
Yes. It has a hose connector for a 155 mm diameter hose, with a maximum recommended hose length of 7 metres.
6. Is this Electric Heater suitable for warehouses?
Yes, it can provide localized heating in suitable warehouse areas when the space and electrical supply meet the heater’s requirements.
7. Where can I buy an Electric Heater in Jeddah?
Nassguard supplies Electric Heaters in Jeddah and across Saudi Arabia, including Riyadh, Dammam, Jubail, and Al Khobar.
The Electric Heater in Jeddah provides a compact and practical heating solution for suitable buildings, warehouses, workshops, construction sites, tents, accommodation camps, and temporary work areas. Its 2.5 kW heating capacity, 300 m³/h airflow, adjustable thermostat, one-stage axial fan, and hose connection make it suitable for controlled localized heating.
The unit operates on 230 V / 50 Hz power and weighs approximately 10.6 kg, making it practical for applications where heating needs can change between work areas.
Nassguard supplies Electric Heaters across Jeddah, Riyadh, Dammam, Jubail, Al Khobar, and other locations throughout Saudi Arabia.
| Specification | Details |
|---|---|
| Product Name | Electric Heater |
| Heating Capacity | 2.5 kW |
| Maximum Heating Capacity | 2,150 kcal/h |
| Heating Control | Single Stage |
| Maximum Air Flow | 300 m³/h |
| Air Pressure | 40 Pa |
| Maximum Temperature Increase | 40°C |
| Fan Type | Axial Fan |
| Fan Stages | One Stage |
| Power Supply | 230 V / 50 Hz |
| Nominal Current | 10.9 A |
| Recommended Fuse | 16 A |
| Power Input | 2.5 kW |
| Electrical Plug | CEE 7/7 |
| Cable Length | 2.6 m |
| Sound Level | 63 dB(A) at 1 m |
| Hose Connector | Included |
| Hose Diameter | 155 mm |
| Maximum Hose Length | 7 m |
| Dimensions | 280 × 260 × 300 mm |
| Weight | 10.6 kg without packaging |
| Thermostat | Adjustable |
