Cooling Vest Inserts in Jeddah are removable cooling packs designed to fit inside compatible cooling vests. They provide a simple way to add or replace the cooling elements in a vest without replacing the complete garment.
These phase change cooling inserts use a phase change material that helps maintain a cooling temperature during use. The supplied product is designed to maintain approximately 58°F (14°C) for up to 3 hours under stated conditions.
Each set contains two Phase Change Cooling Inserts. The inserts use high-strength polyurethane and include hook-and-loop stabilizers that help keep the packs in position inside a compatible vest.
Nassguard supplies Cooling Vest Inserts in Jeddah, Riyadh, Dammam, Jubail, and Al Khobar, with supply available across other areas of Saudi Arabia.
Phase change cooling packs work by absorbing heat as the phase change material moves through its transition. This process helps the insert maintain a relatively stable cooling temperature during the cooling cycle.
The supplied inserts can maintain approximately 58°F (14°C) for up to 3 hours, depending on working conditions and proper preparation. Actual cooling time can vary with outdoor temperature, physical activity, clothing, and other factors.
The inserts sit inside a compatible cooling vest. Their hook-and-loop stabilizers help keep them from moving around during normal activity.
For longer periods, users can prepare additional PCM cooling inserts and rotate them as required. This approach can provide access to a fresh cooling set without changing the entire vest.
Cooling packs for cooling vests provide the main cooling element in many removable-insert vest systems.
Instead of buying another complete vest when the cooling packs need replacement, users can purchase compatible cooling vest replacement inserts. This can make the cooling system easier to maintain.
Compatibility remains important. Users should check the cooling vest model and insert dimensions before purchasing replacement packs. A pack should fit the vest’s designated compartment and secure correctly.
These inserts can suit people who already have a compatible vest and need an additional set for rotation or replacement.
The Cooling Vest Inserts in Jeddah can support several work and outdoor applications where a compatible cooling vest is already in use.
The inserts do not replace proper hydration, rest breaks, shade, ventilation, or other workplace heat controls.
PCM cooling packs can be useful when workers need a removable cooling system during hot-weather activities.
The main advantage comes from the ability to prepare and rotate multiple sets. For example, a user can keep one set in use while another compatible set is prepared for later use.
This can be more convenient than relying on a single cooling pack throughout a long shift. However, users should follow the manufacturer’s instructions for preparing, storing, and reusing the inserts.
The stated cooling duration is up to 3 hours, but the actual period depends on environmental and usage conditions.
A cooling vest replacement insert should match the cooling vest for which it is intended. Before ordering, users should check the vest’s insert compartment and the manufacturer’s compatibility information.
Nassguard supplies Phase Change Cooling Inserts in Saudi Arabia, including:
Supply is also available across other areas of Saudi Arabia.
Prepare the phase change cooling inserts according to the manufacturer’s recommended procedure. Do not use a preparation method that could damage the pack.
Place each insert into the correct compartment of the compatible cooling vest. Secure the hook-and-loop stabilizers so the packs remain in position.
After use, remove the inserts from the vest and follow the recommended storage procedure. Keep the packs clean and inspect them before each use.
Check the polyurethane covering for cuts, punctures, leaks, or other damage. Do not use an insert that shows signs of damage.
For extended work, keep additional compatible inserts available and rotate them according to the manufacturer’s instructions.
When selecting phase change cooling packs, consider the following:
1. What are Cooling Vest Inserts?
They are removable PCM cooling packs designed for use inside compatible cooling vests.
2. How cold do the inserts get?
The supplied specification states that they maintain approximately 58°F (14°C) during their cooling cycle.
3. How long do the cooling inserts work?
They can provide cooling for up to 3 hours, depending on conditions and use.
4. How many inserts come in one set?
Each set contains two Phase Change Cooling Inserts.
5. What are the inserts made from?
The inserts are made from high-strength polyurethane.
6. Can I use additional cooling packs for longer work?
Yes, additional compatible sets can be rotated to support longer periods of cooling.
7. Where can I buy Cooling Vest Inserts in Jeddah?
Nassguard supplies Cooling Vest Inserts in Jeddah, Riyadh, Dammam, Jubail, Al Khobar, and other areas across Saudi Arabia.
Cooling Vest Inserts in Jeddah provide a convenient way to add, replace, or rotate the cooling packs used in a compatible cooling vest. The phase change cooling inserts use a PCM system and can maintain approximately 58°F (14°C) for up to 3 hours under the stated conditions.
Each set contains two inserts made from high-strength polyurethane. Hook-and-loop stabilizers help keep the packs in position inside a compatible vest.
Additional sets can help users manage longer outdoor activities by allowing them to rotate cooling packs. This makes the inserts useful for selected construction, industrial maintenance, field, outdoor, and hot-weather activities.
Nassguard supplies Cooling Vest Inserts in Jeddah, Riyadh, Dammam, Jubail, and Al Khobar, with availability across other locations in Saudi Arabia.
| Specification | Details |
|---|---|
| Product Name | Phase Change Cooling Inserts |
| Product Type | PCM Cooling Inserts |
| Cooling Technology | Phase Change Material |
| Cooling Temperature | Approximately 58°F / 14°C |
| Cooling Duration | Up to 3 hours |
| Material | High-Strength Polyurethane |
| Stabilizers | Hook and Loop |
| Quantity Per Set | 2 Inserts |
| Total Weight | 6 lbs |
| Main Application | Compatible Cooling Vests |
| Use | Cooling and Replacement Inserts |
