Ansell 70 123 in Jeddah is an elbow-length protective arm sleeve designed for industrial workers who need additional protection against cuts and contact heat. Its knitted Kevlar para-aramid construction provides forearm coverage while allowing the arm to move naturally during handling, fabrication, maintenance and assembly work.
Nassguard supplies Ansell 70 123 in Jeddah, Riyadh, Dammam, Jubail and Al Khobar, as well as across Saudi Arabia.
The Ansell HyFlex 70-123 is a protective arm sleeve designed to cover the forearm during industrial work. It uses a 100% Kevlar para-aramid short-fiber liner, giving the sleeve a knitted construction with cut-resistant properties.
The sleeve measures approximately 22 inches / 55.9 cm in length. This elbow-length design gives workers more coverage than hand protection alone, particularly when handling sheets, panels, glass, metal components or other materials that may contact the forearm.
The 10-gauge knitted construction allows the sleeve to remain flexible during movement. This can be useful when workers repeatedly reach, grip, lift or position components.
The sleeve also provides contact heat protection up to 100°C / 212°F within its tested protection level. This makes it suitable for selected tasks where workers may briefly contact warm surfaces.
A thumbslot helps keep the sleeve in position during movement and provides additional coverage around the wrist. The knitwrist design also helps maintain a secure fit.
The sleeve has a silicone-free construction, which can be useful in selected manufacturing and automotive environments where silicone contamination needs to remain controlled.
The Ansell 70 123 in Jeddah can support workers who need additional protection along the arm during industrial handling and manufacturing tasks.
In Jeddah and Riyadh, the sleeve can support automotive facilities, fabrication workshops, manufacturing plants and maintenance contractors. In Dammam and Jubail, it can suit selected metal fabrication, industrial maintenance and equipment-handling applications. Nassguard also supplies Ansell 70 123 in Al Khobar and across Saudi Arabia.
The main advantage of Ansell 70 123 in Jeddah is the additional forearm coverage it provides alongside cut and contact-heat protection.
Hand protection alone does not cover the entire arm. During sheet handling, fabrication or equipment maintenance, the forearm can come into contact with sharp edges or warm surfaces. A protective sleeve adds another layer between the worker and these hazards.
The Kevlar para-aramid liner provides cut-resistant performance while maintaining a knitted structure. This helps the sleeve remain flexible during normal arm movement.
The 22-inch length extends protection toward the elbow, making it suitable for tasks where the worker’s forearm remains close to the workpiece.
The 100°C contact-heat rating can help during suitable brief-contact situations. It does not mean the sleeve can withstand continuous exposure to high temperatures, flames or molten materials.
The thumbslot is useful during repetitive work because it helps prevent the sleeve from sliding upward. The knitwrist design also keeps the lower section positioned around the wrist.
The sleeve is intended for mechanical and thermal protection. Workers should select additional PPE when the job involves extreme heat, flame, molten metal, chemicals, electrical hazards or other specialist risks.
1. What is Ansell HyFlex 70-123 used for?
It is a protective arm sleeve designed for suitable cut and contact-heat hazards during industrial handling, fabrication, maintenance and assembly work.
2. What material does Ansell 70-123 use?
The sleeve uses 100% Kevlar para-aramid short fibers in its knitted liner.
3. Does Ansell 70-123 provide heat protection?
Yes. It provides contact heat protection up to 100°C / 212°F within its tested protection level.
4. How long is the HyFlex 70-123 sleeve?
The sleeve measures approximately 22 inches / 55.9 cm.
5. Does Ansell 70-123 have a thumbslot?
Yes. The thumbslot helps keep the sleeve in position and adds coverage around the wrist.
6. Is Ansell HyFlex 70-123 suitable for metal fabrication?
Yes. It can support suitable metal fabrication and press-shop applications where its certified protection matches the workplace hazard.
7. Where can I buy Ansell 70 123 in Saudi Arabia?
Nassguard supplies Ansell 70 123 in Jeddah, Riyadh, Dammam, Jubail and Al Khobar, as well as across Saudi Arabia.
The Ansell HyFlex 70-123 provides extended forearm protection for industrial workers who face suitable cut and contact-heat hazards. Its 100% Kevlar para-aramid liner gives the sleeve cut-resistant properties while maintaining a flexible knitted construction.
The 22-inch length, thumbslot and knitwrist design provide useful coverage and help keep the sleeve in position during repetitive work. Its contact heat protection up to 100°C adds another level of protection for suitable brief-contact situations.
The sleeve can support metal fabrication, automotive work, press-shop operations, equipment maintenance, assembly, inspection, glass handling and sheet or panel handling.
For businesses looking for Ansell 70 123 in Jeddah, Nassguard supplies the product in Jeddah, Riyadh, Dammam, Jubail and Al Khobar, as well as across Saudi Arabia.
| Specification | Details |
|---|---|
| Product Name | Ansell HyFlex 70-123 |
| Product Type | Elbow-length protective arm sleeve |
| Previous Name | Neptune Kevlar |
| Liner Material | Kevlar para-aramid |
| Liner Composition | 100% Kevlar para-aramid short fibers |
| Construction | Knitted |
| Gauge | 10 Gauge |
| Length | 22 inches / 55.9 cm |
| Width | One Size Fits All |
| Cuff | Knitwrist |
| Thumbslot | Yes |
| Liner Color | Yellow |
| Cut Protection | EN 388: 133XC |
| Thermal Protection | EN 407: X1XXXX |
| Contact Heat | Up to 100°C / 212°F |
| Silicone Free | Yes |
| Antistatic | No |
| Washing Temperature | 40°C / 104°F |
| Main Applications | Metal fabrication, automotive, press shop, maintenance and handling |
